METO’s 200L nano brewery equipment is designed for owner-operated brewpubs, restaurants, hotels and small producers moving beyond pilot batches. The reference system combines a 200L two-vessel electric brewhouse, 200L hot liquor tank, four 200L conical fermenters, a 500L glycol system, portable CIP and digital controls in a compact, expansion-ready layout.
This list defines the delivery scope for procurement review and supplier comparison. Quantities and modules match the standard quotation configuration.
| Module | Equipment | Qty |
|---|---|---|
| Malt Milling | Malt Miller 100kg/hr | 1 set |
| Brewhouse | 200L Two-Vessel + 200L HLT (double layers) | 1 set |
| Brewing Hose | Beer Hose Φ32 / Φ38 (SMS food hose) | 1 set |
| Fermentation | 200L Fermentation Tank | 4 sets |
| Cooling | 500L Glycol Water Tank | 1 set |
| Cooling | 2P Glycol Water Chiller | 1 set |
| Cooling Transfer | Pump & pipeline + DC24V solenoid valve per tank | 1 set |
| CIP | Portable CIP Pump (sanitary SUS304) | 1 set |
| Control | Brewing System Control Cabinet (Digital Type) | 1 set |
| Spare Parts | Brewhouse + fermentation + control spare parts package | 1 set |
We can provide layout suggestions, utilities lists, and integration notes to reduce on-site commissioning time.
The brewhouse is configured for practical brewing with sanitary hard piping, tri-clamp connections, PID-based heating control, and pump speed regulation by VFD. The skid is assembled and ready to brew.
| Useful Capacity | 200L per batch (30% headspace) |
|---|---|
| Overall Dimensions | 3100mm × 860mm × 1500mm |
| Interior Shell | SUS304 full welded, TH=3mm |
| Exterior Shell | SUS304 full welded, TH=2mm |
| Heat Exchanger | Two-stage plate heat exchanger, 2㎡ |
| Wort Pump | 1 m³/hr |
| Hot Water Pump | 1 m³/hr |
| Control Cabinet | Stainless steel control cabinet |
Fermentation capacity is a common bottleneck in small systems. This 200L package includes four conical fermenters to support stable scheduling, temperature-controlled fermentation, and hygienic cleaning.
| Tank Capacity | 200L (minimum headspace +25%) |
|---|---|
| Dimension | Φ820 × 1700mm (customizable) |
| Inner Shell | SUS304 full welded, TH=3mm |
| Outer Shell | SUS304 full welded, TH=2mm |
| Insulation | 80mm polyurethane (low thermal conductivity) |
| Interior Finish | Polished to 0.4 μm without dead corner |
| Cone Angle | 60° conical bottom (customizable) |
Cooling is the stability layer for fermentation repeatability. This package provides a dedicated glycol tank, air-cooled chiller, and a transfer kit with solenoid valves for each tank.
| Capacity | 500L (minimum headspace +15%) |
|---|---|
| Dimension | Φ960 × 1600mm (customizable) |
| Inner / Outer | SUS304 full welded; inner 3mm / outer 2mm |
| Finish | Inside polishing to 0.4 μm without dead corner |
| Insulation | PU 80mm |
| Leakage Test | Documented full water and pressure testing for 48 hours |
| Working Pressure | Atmosphere |
| In/Out & Drain | Inlet/outlet on side wall avoiding vortex & sediment; drainage at bottom center with butterfly valve |
| Type | Air cooled glycol water chiller |
|---|---|
| Ambient / Outlet Temp | 35°C ambient; -5°C outlet |
| Cooling Capacity | 5200W / 4500 Kcal/h |
| Power Source | 3-phase / 380V / 50Hz (customizable) |
| Gross Power | 2.2kW |
| Rated Current | 10.0A |
| Refrigerant | R407C (other freon optional) |
| Noise Level | 58 dB(A) |
| Size / Weight | 612 × 590 × 1085mm; 120kg unit / 132kg running |
| Testing & Protection | N2 pressure test; shock absorption design; alarms for pressure/temp/overload/anti-freezing/water flow; outdoor placement cover |
A dedicated CIP pump supports consistent cleaning for tanks and pipelines, reducing contamination risk and improving turnaround time.
| Function | CIP pump, 4 m³/hr, sanitary SUS304 |
|---|---|
| Pump Power | 0.75kW; delivery 31m |
| Pump Brand | CNP |
| Shaft Seal | Graphite / Carborundum |
| Mobility | Full 304SS portable trolley with 4 pcs 4″ wheels |
| Included | Valves & fittings; SUS304 control box; hoses 2m × 2 pcs |
Procurement-ready control architecture: pump control, heating control, fermentation cooling control (auto/manual), and chiller temperature display.
| Cabinet Material | Stainless steel |
|---|---|
| Panel Type | Digital control panel; hanging type assembly |
| Electrical Parts | CHINT |
| VFD | Danfoss (CE/UL) |
| Temperature Controller | Anthone (CE/UL) for brewhouse & fermenters |
| Main Functions | Mash/Wort pump on/off control; tank heating manual switch control; fermentation cooling auto/manual switchable; display chiller temperature; RIMS control |
To avoid delays during installation and commissioning, confirm site utilities early. Electrical supply is customizable.
Standard spare parts are supplied for brewhouse, fermentation, and control systems to reduce downtime and support commissioning.
Explore other brewery equipment models by capacity to match different production goals and future expansion plans.
Relevant tanks and pressure-bearing components are manufactured in food-grade SS304 or SS316 as specified, with sanitary TIG welding, controlled surface finishing, and documented inspection records. All applicable equipment undergoes documented 48-hour water and pressure testing before shipment. CE, UL, and CSA compliance documentation is available for the applicable equipment scope and destination-market requirements. METO also provides layout, utilities, commissioning guidance and long-term expansion support.
Configuration based on brewing workflows, not generic tank lists.
Layouts, utilities lists, and integration notes for your site.
Better cost control, faster response, clearer accountability.
Training, spare parts guidance, and expansion planning support.
Malt Handling → milling & transfer preparation
Brewhouse → mash/lautering + boil/whirlpool
Cooling & Transfer → heat exchange to fermentation temp
Fermentation → jacketed conical fermenters for stability
Conditioning (Optional) → BBT / maturation
CIP → clean-in-place hygiene standardization
Packaging (Future-ready) → keg/bottle/can integration
Choose a 200L nano brewery layout when direct sales, compact installation and an expansion-ready fermentation plan are the main priorities.
A 200L batch provides more saleable beer per brew day than a pilot system while remaining practical for small teams and constrained sites. It is best suited to rotating tap lists, direct taproom sales and controlled startup production. Final tank quantity should be based on fermentation days, brew frequency and whether beer will be served from tanks, kegs or packaged containers.
These verified METO nano projects use 300L, 400L and 500L systems. They are adjacent-capacity references for a 200L buyer and are shown with their actual project capacities.
Answers for engineering and procurement teams evaluating a 200L brewery equipment project.
Yes, when the sales plan is based on a small taproom, restaurant or limited local distribution. METO sizes the fermenters, glycol system and packaging connection around the planned brew frequency and sales channel.
The reference package includes four 200L fermenters. The final quantity depends on fermentation time, beer styles, brews per week and packaging timing.
Relevant tanks and pressure-bearing components are manufactured in food-grade SS304 or SS316 as specified, with sanitary TIG welding, controlled surface finishing, and documented inspection records. All applicable equipment undergoes documented 48-hour water and pressure testing before shipment. CE, UL, and CSA compliance documentation is available for the applicable equipment scope and destination-market requirements.
Provide the destination country, voltage, site layout, heating preference, beer styles, brewing schedule and expansion plan.
Share your weekly sales target, beer styles, local voltage, site dimensions and preferred service format. METO will return a matched 200L system configuration, utility list, layout suggestion and quotation.
The 200L system can be prepared for future keg, bottle or can integration so packaging can be added without redesigning the process connections.
Fill in the essentials—our team will respond with a technical proposal.
Tip: Attach layout drawings and utilities list for faster engineering confirmation.
Our team will reply using the contact details you provide. Please check your inbox and spam folder for our response.
*We respect your privacy. All information submitted is strictly confidential.
Your details will only be used to respond to your inquiry. We never send unsolicited emails or promotional messages.
